Patio Materials Estimator & Planning Guide
Plan a patio layer by layer: paving area, slab count, sub-base volume, bedding material and ordering checks.
Open →Project planners: connect the calculators into a material list
A single calculator answers one quantity. These planners show how several quantities fit together for a real job, while keeping assumptions visible.
Decking Materials Estimator & Planning Guide
Estimate decking boards, joists and stock lengths as separate parts of the same deck rather than one rough area figure.
Open →Fence Materials Estimator & Planning Guide
Plan fence panels, posts, gravel boards and post-mix from the actual boundary run.
Open →Concrete Slab Materials Estimator
Calculate slab volume, ordering allowance, bag quantities and ready-mix cost from one measured slab.
Open →Brick Wall Materials Estimator
Estimate brick quantity and mortar demand from net wall area, openings and an explicit waste allowance.
Open →Stud Wall Materials Estimator
Plan studs, plates, noggins, plasterboard and fixings for a basic timber partition using separate quantity checks.
Open →Plasterboard Room Estimator
Estimate plasterboard sheets for a whole room from wall dimensions, openings, an optional ceiling, actual board size and a visible cutting allowance.
Open →Tile, Adhesive & Grout Estimator Guide
Plan tiles, adhesive and grout from the actual tiled surfaces and product-specific coverage figures.
Open →Roof Tiling Materials Estimator
Estimate sloping roof area, field tiles, battens and felt using separate area and linear calculations.
Open →Driveway Sub-Base & Aggregate Estimator
Plan excavation, MOT Type 1 and surface aggregate quantities for a measured driveway.
Open →Room Decorating Quantity Estimator
Estimate paint, wallpaper, coving and skirting quantities from a single set of room measurements.
Open →Shed Base Materials Estimator
Estimate excavation, sub-base and concrete quantities for a simple rectangular shed base.
Open →External Render Materials Estimator
Estimate render volume and bag quantities from wall area, openings, thickness and product coverage.
Open →Loft Insulation Quantity Estimator
Calculate loft area and roll or board quantities using the chosen product’s stated coverage.
Open →Excavation & Skip Planning Guide
Estimate in-situ excavation, loose spoil and a planning skip volume without confusing the three quantities.
Open →